 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 4-Pin SOP OptoMOS(R) Relay CPC1025N Blocking Voltage Load Current Typical On-resistance CPC1025N 400 120 25 Units V mA Features * Small 4-Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Description The CPC1025N is a miniature 1-Form-A solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture. The optically coupled input is controlled by a highly efficient GaAIAs infrared LED. The CPC1025N uses Clare's state of the art double molded vertical construction packaging to produce the world's smallest relay. The CPC1025N offers board space savings of at least 20% over the competitor's larger 4-Pin SOP relay. Approvals * UL Recognized Component File#: E76270 * Certified to: EN60950 Ordering Information Part # CPC1025N CPC1025NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Pin Configuration CPC1025N Pinout Switching Characteristics of Normally Open (Form A) Devices 2002/95/EC RoHS e3 www.clare.com 1 DS-CPC1025N-R02 CPC1025N Absolute Maximum Ratings (@ 25C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Capacitance Input to Output Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 400 5 50 1 150 400 1 1500 -40 to +85 -40 to +125 Units V V mA A mW mW pF Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current AC Peak 1 Peak Load Current On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current 1 2 3 Conditions 10ms IF=5mA, IL=120mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=120mA IF=5mA VR=5V Symbol IL ILPK RON ILEAK TON TOFF COUT IF IF VF VR IR Min 2 0.3 0.9 - Typ 25 25 0.9 1.2 - Max 120 350 30 1 2 1 1.4 5 10 Units mA mA A ms ms pF mA mA V V A Load current derates linearly from 120mA @ 25oC to 80mA @ 85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60C) an LED drive current of 5mA is recomended. 2 www.clare.com R02 CPC1025N PERFORMANCE DATA* CPC1025N Typical LED Forward Voltage Drop (Ambient Temperature = 25oC) IF = 5mADC CPC1025N Typical On-Resistance Distribution (Ambient Temperature = 25 oC) (Load Current = 120mA) CPC1025N Typical Blocking Voltage Distribution (Ambient Temperature = 25 oC) 35 30 Device Count (N) 35 30 Device Count (N) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 25 20 15 10 5 0 23.5 24 24.5 25 25.5 26 26.5 420 425 430 435 440 445 450 LED Forward Voltage Drop (V) On-Resistance () Blocking Voltage (V) 25 20 15 10 5 0 CPC1025N Typical IF for Switch Operation o (Ambient Temperature = 25 C) (Load Current = 120mA) 25 20 15 10 5 0 CPC1025N Typical IF for Switch Dropout (Ambient Temperature = 25 oC) (Load Current = 120mA) 25 20 15 10 5 0 CPC1025N Typical Turn-On Time (Ambient Temperature = 25 oC) (Load Current = 120mA; IF = 5mA) Device Count (N) Device Count (N) 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.45 0.50 0.55 0.60 0.65 0.70 0.75 Device Count (N) 0.50 0.60 0.70 0.80 0.90 1.00 1.10 LED Current (mA) LED Current (mA) Turn-On (ms) 25 20 15 10 5 0 CPC1025N Typical Turn-Off Time (Ambient Temperature = 25oC) (Load Current = 120mA; IF = 5mA) Load Current (mA) 180 160 140 120 100 80 60 40 20 0 CPC1025N Typical Load Current vs. Temperature 0.016 0.014 0.012 0.010 CPC1025N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated Device Count (N) IF =5mA IF =2mA 0.008 0.006 0.004 0.002 0 0.21 0.22 0.23 0.24 0.25 0.26 0.27 -40 -20 0 20 40 60 o 80 100 120 -40 -20 0 20 40 60 80 100 Turn-Off (ms) Temperature ( C) Temperature (oC) 455 Blocking Voltage (V) 450 CPC1025N Typical Blocking Voltage vs. Temperature 440 435 430 425 420 -40 -20 0 20 40 60 80 100 5mA 10mA Turn-Off (ms) Turn-On (ms) 445 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 CPC1025N Typical Turn-On vs. Temperature (Load Current = 80mA) -40 -20 0 20 40 60 80 100 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 CPC1025N Typical Turn-Off vs. Temperature (Load Current = 80mA) 10mA 5mA -40 -20 0 20 40 60 80 100 Temperature (oC) Temperature (oC) Temperature (oC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.clare.com 3 CPC1025N PERFORMANCE DATA* LED Forward Voltage Drop (V) 1.8 1.6 CPC1025N Typical LED Forward Voltage Drop vs. Temperature 1.4 1.2 1.0 0.8 50mA 30mA 20mA 10mA 5mA -40 -20 0 20 40 60 o 80 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 CPC1025N Typical Turn-On vs. LED Forward Current (Load Current = 120mA) 1.4 1.2 Turn-Off (ms) 1.0 0.8 0.6 0.4 0.2 CPC1025N Typical Turn-Off vs. LED Forward Current (Load Current = 120mA) Turn-On (ms) 0 5 10 15 20 25 30 35 40 45 50 0 0 5 10 15 20 25 30 35 40 45 50 Temperature ( C) LED Forward Current (mA) LED Forward Current (mA) 60 50 On-Resistance ( ) 40 30 20 10 CPC1025N Typical On-Resistance vs. Temperature (Load Current = 80mA; IF = 10mA) LED Current (mA) 3.000 2.500 CPC1025N Typical IF for Switch Operation vs. Temperature (Load Current = 80mA) 3.000 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 0 -40 CPC1025N Typical IF for Switch Dropout vs. Temperature (Load Current = 80mA) 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 Temperature ( o C) Temperature (oC) Temperature ( oC) 150 Load Current (mA) 100 50 0 CPC1025N Typical Load Current vs. Load Voltage (Ambient Temperature = 25oC) IF = 5mA -50 -100 -150 -3 -2 -1 0 1 2 3 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 CPC1025N Energy Rating Curve Load Current (A) 1ms 10ms 100ms 1s 10s 100s Load Voltage (V) Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02 Manufacturing Information Soldering Recommended soldering processes are limited to 260C component body temperature for 10 seconds. 2002/95/EC Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. RoHS e3 MECHANICAL DIMENSIONS 0.38 TYP. (0.015 TYP.) 4-Pin SOIC Narrow ("N" Suffix) PC Board Pattern (Top View) 2.18 MAX. (0.086) 2.54 TYP. (0.100 TYP.) Tape and Reel Packaging for 4 pin SOIC package 330.2 DiA (13.00" DiA) A0 = 6.50 (0.256) P = 8.00 (0.315) K1 = 2.30 (0.091) A Top Cover Tape Thickness 0.102 MAX (0.004 MAX) B0 = 4.70 (0.185) W = 12.00 MAX (0.472 MAX) A K0 = 2.7 (0.106) SECTION A-A NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Embossed Carrier Embossment Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1025N-R02 (c)Copyright 2005, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/11/05 5 |
Price & Availability of CPC1025N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |